• How to repair your surfboard in 10 minutes

    How to repair your surfboard in 10 minutes

    Surfboard and kitesurf repair guide for dummies

Home > BLOG > How to repair your surfboard in 10 minutes

Have you broken or dented your beloved surfboard and are you trying to figure out how to fix it? First of all, don't panic !
Surfboards unfortunately break, this is a fact, the important thing is to repair the board before returning to the water to prevent a small sketch of nothing from turning into a much more serious problem that can compromise the surfboard .

Before explaining how to repair your surfboard I have to tell you that there are two types of repairs: makeshift repair done on the spot with the aim of returning immediately to the water and repair done at home in a workmanlike and calm manner. In this article we will deal with how to repair small holes on the table, directly on the spot or on vacation, to return to the water immediately. 

Repair on the spot to return immediately to the water.

This is the simplest type of surfboard repair. It is perfect when the damage is small and limited. A classic example is a small hole in the tail or on the bottom of the table caused by a rock against which your board has collided. If you notice a dent on the table the first thing to do is to check if the damage is only superficial or if it is deeper. If the damage is deeper it means that the water can filter through the hole inside the table and when this happens it is serious, VERY serious.
How do you know if water can filter or not from a dent on the surfboard? Simple. Rest your mouth on the dent and blow. Water can also pass if the air passes.You absolutely MUST NOT re-enter the water  like this, before having solved the problem, otherwise the table can drink water and make it come out then it is not as simple as running immediately for cover. 
There are several ways to plug small holes in the table and return to the water quickly ... on the beach I saw a little bit of everything and some ideas can also work for not too long sessions and really small damages. 

1) Paraffin . Plug the hole with paraffin is perhaps the simplest solution. Paraffin adheres to your table and creates a water barrier. PRO: very easy, if you surf you will surely have paraffin with you. CONS: it works only on micro-holes and for a not too long time. Paraffin is likely to come off while you are in the water, so you need to check its seal during the session ... but for minor damage it can work. Obviously as soon as you have the chance you will have to repair the damage properly.

2) American tape . The American ribbon or duct tape is a particular resistant and waterproof adhesive tape that can be found in any hardware store or DIY store. The American tape should be applied to the dry board, after having cleaned the part with a little fresh water. The American ribbon can be useful on many occasions, so it should never be missing in a surfer's bag. PRO: easy to apply and effective because it does not come off easily. CONS: obviously only works with small holes and in any case there is always the risk of it coming off. Also in this case it is obviously a temporary solution, waiting for the final repair.

3) We come to the ad hoc solutions and therefore of proven and safe effectiveness: the ready to use repair kits. These are glues or various compounds specially designed for surfboard repairs and therefore definitely more durable and safe than the first two makeshift solutions. In the market they are of various types and are always more effective and easy to use, let's see some of them:

Surf Gum Pro is a moldable plasticine suitable for small repairs of both polyester and epoxy boards. The package is a small tube very practical to carry around, even on vacation and has a duration of about two years. When you need it, simply cut off a piece and shape it between your hands like a pongo. By handling it, it is activated. When it's all white, it's ready to use. At this point it should be made to adhere well to the table (clean) being careful not to leave any ledges. In just 10 minutes it is ready and you can get back in the water! Watch the video on how it works on youtube .
Here is the link to buy it on amazon:  Surf Gum Pro  the cost is around € 19 

Clear Surf Ding Tape is a very powerful acrylic adhesive tape able to adhere perfectly to your table creating a protective barrier against water and infiltration. In practice, a patch for your surfboard. The package is a roll 48mm wide by 4 meters long. Extremely easy and quick to use. You can then remove it once at home to make a professional repair. Of course it is also found in different formats, but I find the roll particularly versatile. Of course unlike the already cut and ready-to-use formats, in this case you also need to bring a pair of scissors with you.
Here the link to buy it on amazon: Surf Ding Tape  the cost is 10 €

The third solution is the resin tubes , very well known are those of  Solarez.  These are resin tubes ready for use . It is a resin that hardens in a few minutes if exposed to sunlight, so it should be used in the shade and exposed to the sun for about 3 minutes to harden. Compared to the other options it is a bit more difficult to use, but the result is definitive. The important thing to watch out for is that it must be chosen based on the material the surfboard is made of:  PolyesterSolarez is for polyester boards (most surfboards are), while Epoxy Solarez is for epoxy boards (most surfboards for kitesurfing are). In reality, for an expert eye it is quite easy to distinguish the two materials, but if you have any doubts about the construction of your board, you can use the solar epoxy going on the safe side. The only important thing, which should never be done is to use the Polyester tube on an Epoxy board as it could cause everything to melt and widen the damage.
Here the link to the Solarez polyester on amazon:  Solarez Polyester  the cost is about 18 €
Here the link to the Solarex epoxy on amazon:  Epoxy Solarez  the cost is about 20 €

All these solutions are perfect for small damages, which are then the most common, when the priority is to return to the water quickly. My advice is to choose the solution that best suits your abilities and always carry it with you in the sack of the table: choose the adhesive tape if your level of dexterity is close to 0, the Solarez if you are not afraid of it, dirty your skin a little hands and you have a minimum of DIY skills.

Unfortunately, this type of repair is not always sufficient ... Extensive and deep damage requires workmanlike repairs that you can proceed to do yourself if you have a little familiarity with DIY, otherwise it is better to rely on your surf trusted shop or shaper. 


    Recommended products

  • Neoprene hood with visor
    • M
    € 35,00-17%€ 29,00
  • Change mat
    Change mat
    € 35,00-17%€ 29,00
  • Prologue 3/2 children's wetsuit
    Prologue 3/2 children's wetsuit
    Quiksilver

    Prologue 3/2 children's wetsuit

    Affordable wetsuits for children and teenagers

    • 10
    € 110,00-19%€ 89,00
  • Neoprene balaclava hood
  • See all: SURF →

    Guarda anche

    • Rip Curl surf backpacks and bags: which one to choose

      Rip Curl surf backpacks and bags: which one to choose

      From surf trips with fins and a wetsuit to your everyday session: our guide to the Rip Curl bags in our shop

      A wet wetsuit, fins, wax, sunscreen, your phone, maybe a laptop: surfers carry things that don't get along. Rip Curl designed its range of backpacks and bags around exactly this problem. Here is how the models in our shop are built and which one to pick

    • Pukas Space Oddity: la nostra review

      Pukas Space Oddity: la nostra review

      Una one board quiver firmata david Santos

      La Space Oddity, il nuovo modello di Pukas firmato David Santos, si accende quando l'onda ha energia, e da lì diventa sorprendentemente facile da girare. L'abbiamo portata in acqua in Mediterraneo e alle Maldive. Ecco com'è andata, compreso

    • Channel Islands The Solution: il nostra review

      Channel Islands The Solution: il nostra review

      L'abbiamo provata in giro per l'Europa ed ecco cosa ne pensiamo

      Quest'estate, tra le coste europee, di onde buone se ne sono viste poche. Vento, mare piatto, giornate moscia — il classico repertorio di quando il surf non regala niente. Ed è proprio in queste condizioni che abbiamo deciso di testare la

    lock