Long Island recently presented its new surfskate truck: the Lean Genesis system. It is a new rotating plate system in which the movement is not entrusted to springs, but to bushings (rubbers). A system born with the aim of combining a wide angle of rotation with simplicity and lightness.
Now that we've had it in our hands and especially under our feet for a few days now, the time has come for a complete review to reveal all the secrets of this new system that promises really well on paper.
For the uninitiated, Long Island is a Spanish skate brand. The same factory that also produces YOW surfskates, which is why the comparison between the two systems arises spontaneously.
Already at first sight it is easy to notice the similarities of the new Genesis truck with YOW's Meraki... But will it be only an aesthetic similarity or something more?
Let's take a close look at this new Long Island system and try it to understand how it goes, also comparing it with other surfskate trucks.
The Lean Genesis truck in detail
Long Island's Truck Lean Genesis looks quite similar aesthetically to Yow's Meraki, although it is leaner and lighter. However, the impression is one of solidity and robustness.
Disassembling it we see that its operation is similar to the meraki, but inside instead of a spring there are two bushings, suitably greased to ensure fluidity. A rather simple system.
The actual truck is mounted on the tilt plate, just like the Meraki truck.
Weight of Lean Genesis 623gr
Lean Genesis vs Meraki surfskate truck
The Meraki system is a very solid system and uses an S5 spring inside to allow the truck to steer. Mounted on the tilting plate we have the truck with bushing. The system as a whole allows for exceptional bending angles, together with an extremely soft and reactive feeling.
Weight: the meraki system weighs 879gr (+256gr more than the Genesis)
Known problems or defects: some sends have weak bushings. However, Yow is very efficient and if it falls within the terms it will replace it under warranty
Comparison feeling: The response of the Meraki truck is more fluid and continuous but above all a more decisive return is perceived underfoot, especially in pumping. Differences that, however, hardly a beginner can perceive.
Lean Genesis vs similar cx surfskate truck
The Long Island is a good quality mid-range product. In the same price range we can compare it with other surfskates that use similar Carver CX trucks, such as Outride for example. (Original Carver Cx's obviously not in the same price range).
Carver CX trucks (original or various copies) are Reverse King Pin type trucks. They are simple, light, resistant trucks. There are no springs or other mechanisms. It is the geometry of the truck that allows you to steer and the bushings inside complete the job. The stiffness of the truck can be adjusted by tightening or loosening the screw and if necessary by changing the bushings.
The weight of the Cx is 420grams (-203 gr difference)
Known Issues or Defects: When new or lightly used they tend to be stiff or squeak, but this is easily fixed with grease.
Comparison feeling: The Genesis system is easier and more intuitive than CX systems and the like, especially under the feet of beginners. The cx truck has a better rebound in pumping, but as long as you set the movement correctly. For this reason, the Cx truck is generally more appreciated by those who are already at a more advanced level.
Lean Genesis vs Slide 3.0
The Truck Slide has a mechanism mounted on two swinging plates. The truck slide also rotates around a pin but also has an internal spring that regulates stiffness and guarantees rebound at the end of the stroke. It has no Bushing and despite having the possibility of adjusting the hardness it is highly discouraged to loosen or tighten the spring, so in fact it is not adjustable.
Weight: The Slide truck weighs 603gr (-20gr compared to the Genesis)
Known issues or defects: The spring is not very strong. Loosening or tightening the spring can cause it to break.
Comparison of feeling: both Genesis and slide are very easy. Underfoot the feeling is reassuring and not excessive instability. They are two systems that are also very popular with beginners.
How's the new Genesis Long Island truck doing?
We tried and had the new Genesis system tested with the Long Island Somo 33' board.
As soon as you get on the Long Island Somo 33' the sensation is of a really easy, reassuring, stable surfskate... The feeling is soft and fluid.
The board has a nice width and gives a lot of safety. The deck underfoot offers great support and allows you to push hard.
The truck is very fluid and intuitive. The pumping has a good response and the pace is continuous and not too tiring.
Even on small descents the skate proved to be stable and always active, even ready for decisive changes of direction.
Beginners: We had beginners and intermediates try the skate and they immediately had a great feeling as soon as they got on the board.
Defects: the bushings tend to creak a bit... luckily the problem decreases with use.
Conclusions
The new Long Island Lean Genesis system convinced us for its feeling and immediacy.
Certainly more appreciated by beginners than by expert skaters, it is an excellent product both for daily use and for surf training.
Compared to its closest competitor Slide, the build quality is definitely its plus point. Modern deck updated both in shape and size and made in Europe in the same YOW factory, quality accessories such as the Cinetic wheels (our favorites in terms of value for money).