• Micro water infiltration in surfboards

    Micro water infiltration in surfboards

    A small problem that can become enormous

Home > BLOG > Micro water infiltration in surfboards
Have you ever noticed micro "spider webs" on your surfboard? Those small, thin cracks that look like radial lines on the resin are not just a sign of wear and tear: they are often the first symptom of micro water infiltration. At first, they seem harmless, almost like an aesthetic effect. In reality, they are small fractures that run through the outer coating and allow water to penetrate the inner structure of the board.


Why those "spider webs" are a warning sign

Even a micro crack can turn into significant damage. Water slowly entering the foam can cause:

Weight gain and loss of manoeuvrability.

Structural weakness of the shell.

Delamination, i.e. the separation between the fibre and the inner core.

Stains and yellowing due to trapped moisture. The point is simple: once infiltration begins, it will not stop on its own.

What to do when these micro cracks appear

When micro "spider webs" begin to appear on the board, it is best to take immediate action before they turn into larger cracks or water reaches the internal foam. For such minor damage, it is essential to use a product designed specifically to seal fine cracks and delicate areas. The procedure is simple: just apply resin to the damaged area to immediately block the infiltration.

There are two ways to proceed:

Rely on a shaper, who will repair the crack with resin and a professional finish.

Use a specific resin to seal micro-cracks, ideal for those who want to fix the problem quickly themselves.

Both solutions prevent water from entering and save the board from much more serious internal damage.

The practical solution: Solarez Crack Seal 15ML

To quickly repair "spider webs", deep scratches or stress cracks, we tested Solarez Crack Seal 15ML directly on one of our boards. The product acts as an ultra-fast UV sealant, ideal for blocking micro-infiltrations before they become a serious problem. Being epoxy-based, it can be used on all boards, both PU and EPS.

Step-by-step procedure

Surface preparation

Lightly sand the damaged area to remove any residue and create a slightly rough surface, so that the sealant adheres better.

Product application

Using the brush provided, apply Solarez Crack Seal directly to the crack or micro-fissure, taking care to cover it completely.
Drying

Leave the product to dry in sunlight: the sealant hardens quickly thanks to the action of UV rays.

Finishing (optional)

If necessary, gently sand the surface to remove any excess resin and achieve a smooth finish.

Testing on other materials: Wing front

We also tested the product on a chipped wing front and the result was exceptional! Once again, Solarez Crack Seal perfectly sealed the micro crack, proving its effectiveness not only on traditional surfboards, but also on thinner and more delicate materials and structures. Results With this simple procedure, we were able to: immediately close the crack, prevent water from seeping in, avoid more serious internal damage, and keep the board light and high-performing.

In conclusion

Those thin spider webs are not just signs of ageing: they are the first warning that the board is starting to give way. Taking immediate action with a specific sealant such as Solarez Crack Seal 15ML, tested by us on a real board, means preventing leaks, preserving the structure and extending the life of your surfboard.

A small intervention today avoids a big problem tomorrow.

Solarez crack seal repairs cracks 15ML
SOLAREZ Solarez crack seal repairs cracks 15ML € 35,00€ 20,00-43% See the product →

Guarda anche

  • Rip Curl surf backpacks and bags: which one to choose

    Rip Curl surf backpacks and bags: which one to choose

    From surf trips with fins and a wetsuit to your everyday session: our guide to the Rip Curl bags in our shop

    A wet wetsuit, fins, wax, sunscreen, your phone, maybe a laptop: surfers carry things that don't get along. Rip Curl designed its range of backpacks and bags around exactly this problem. Here is how the models in our shop are built and which one to pick

  • Pukas Space Oddity: la nostra review

    Pukas Space Oddity: la nostra review

    Una one board quiver firmata david Santos

    La Space Oddity, il nuovo modello di Pukas firmato David Santos, si accende quando l'onda ha energia, e da lì diventa sorprendentemente facile da girare. L'abbiamo portata in acqua in Mediterraneo e alle Maldive. Ecco com'è andata, compreso

  • Channel Islands The Solution: il nostra review

    Channel Islands The Solution: il nostra review

    L'abbiamo provata in giro per l'Europa ed ecco cosa ne pensiamo

    Quest'estate, tra le coste europee, di onde buone se ne sono viste poche. Vento, mare piatto, giornate moscia — il classico repertorio di quando il surf non regala niente. Ed è proprio in queste condizioni che abbiamo deciso di testare la

lock